{"product_id":"rx480e-1a","title":"RX480E-1A","description":"\u003ch2 id=\"function-description-and-setting-method\"\u003eFunction description and setting method\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e(1) Momentary mode; (2) Toggle mode; (3) Latching mode; (4) Reset function; (5) Power-On Auto-Engagement.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eOnce the receiving module and transmitter are paired and a working mode is set, the receiving module will keep this mode even after power off and power on again.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThe following working modes require the use of QIACHIP brand remote controls (transmitters) and controllers (receiving modules\/wireless remote control switches). Compatibility with other brands is not guaranteed.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAll of the following modes require an external switch\/button to be connected to the RX480E-1A receiver module before use.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 id=\"1-momentary-mode\"\u003e(1) Momentary mode\u003c\/h3\u003e\n\u003cp\u003eIn this mode:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePress and hold the button on the transmitter: the output pin of the receiving module outputs a high level and stays high while the button is held down.\u003c\/li\u003e\n\u003cli\u003eRelease the button: the corresponding output pin of the receiving module switches back to a low level.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 id=\"how-to-set-momentary-mode\"\u003eHow to set momentary mode\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eStep 1\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAfter connecting the external learning button, Click the external learning button connected to the receiving module four times. The LED indicator on the receiving module will flash four times, then stay on, and the receiving module will enter the pairing state.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 2\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePress the button on the transmitter to be paired. The LED indicator on the receiving module will flash and then turn off, indicating that the momentary mode has been set successfully.\u003c\/p\u003e\n\u003ch3 id=\"2-toggle-mode\"\u003e(2) Toggle mode\u003c\/h3\u003e\n\u003cp\u003eIn this mode:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePress the matched button on the transmitter: the output pin of the receiving module outputs high level and remains unchanged.\u003c\/li\u003e\n\u003cli\u003ePress the same button again: the corresponding output pin of the receiving module switches to low level.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 id=\"how-to-set-toggle-mode\"\u003eHow to set toggle mode\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eStep 1\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAfter connecting the external learning button, Click the external learning button connected to the receiving module twice. The LED indicator on the receiving module will flash twice, then stay on, and the receiving module will enter the pairing state.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 2\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePress any button on the transmitter to be paired. The LED indicator on the receiving module will flash continuously and then turn off, indicating that the toggle mode has been set successfully.\u003c\/p\u003e\n\u003ch3 id=\"3-latching-mode\"\u003e(3) Latching mode\u003c\/h3\u003e\n\u003cp\u003eIn this mode:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe two buttons on the transmitter control the output pin of the receiving module to output high level and low level respectively.\u003c\/li\u003e\n\u003cli\u003eThe first configured button can only control the output pin to output high level, and the second configured button can only control the output pin to output low level.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 id=\"how-to-set-latching-mode\"\u003eHow to set latching mode\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eStep 1\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAfter connecting the external learning button, Click the external learning button connected to the receiving module three times. The LED indicator on the receiving module will flash three times, then stay on, and the receiving module will enter the pairing state.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 2\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePress one button on the transmitter to be paired. The LED indicator on the receiving module will flash and then stay on.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 3\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePress another button on the transmitter to be paired. The LED indicator on the receiving module will flash continuously and then turn off, indicating that the latching mode has been set successfully.\u003c\/p\u003e\n\u003ch3 id=\"4-reset-function\"\u003e(4) Reset function\u003c\/h3\u003e\n\u003cp\u003eWhen the RX480E-1A receiver module is reset, all paired transmitters will be unpaired and will no longer be able to control the receiver module.\u003c\/p\u003e\n\u003ch3 id=\"how-to-reset\"\u003eHow to reset\u003c\/h3\u003e\n\u003cp\u003eAfter connecting the external learning button, click the external learning button connected to the receiving module 8 times. The indicator light will flash 8 times and then turn off. The reset will be complete.\u003c\/p\u003e\n\u003ch3 id=\"5-power-on-auto-engagement\"\u003e(5) Power-On Auto-Engagement\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAfter the module is powered off and then powered on again, its output pin directly outputs high level.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 id=\"how-to-set-power-on-auto-engagement\"\u003eHow to set Power-On Auto-Engagement\u003c\/h3\u003e\n\u003cp\u003eAfter connecting an external learning button, press the learning button 6 times. The indicator on the receiving module flashes and then turns off, and the output pin of the receiving module outputs high level.\u003c\/p\u003e","brand":"rx480e","offers":[{"title":"Default Title","offer_id":51701009776935,"sku":null,"price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3657\/6551\/files\/QIACHIP_RX480E-1A_Size_Figure.webp?v=1784874848","url":"https:\/\/rx480e.com\/products\/rx480e-1a","provider":"rx480e","version":"1.0","type":"link"}