{"product_id":"rx480e-4c","title":"RX480E-4C","description":"\u003ch2 id=\"function-description-and-setting-method\"\u003eFunction description and setting method\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e(1) Momentary mode; (2) Toggle mode; (3) Latching mode; (4) Reset function;\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eThe remote control with key value 8421 is used by default for mode setting as described in this manual.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWhen using the third working mode, a transmitter with at least two buttons is required.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOnce the receiving module and transmitter are paired and a working mode is set, the receiving module will keep this mode even after power off and power on again.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThe following working modes require the use of QIACHIP brand remote controls (transmitters) and controllers (receiving modules\/wireless remote control switches). Compatibility with other brands is not guaranteed.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 id=\"1-momentary-mode\"\u003e(1) Momentary mode\u003c\/h3\u003e\n\u003cp\u003eIn this mode:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePress and hold the remote control button with key value 8, and the D0 pin on the receiver module will output a high-level signal \"1\".\u003c\/li\u003e\n\u003cli\u003eRelease the remote control button with key value 8, and the output signal on D0 pin of the receiver module will change to \"0\".\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 id=\"how-to-set-momentary-mode\"\u003eHow to set momentary mode\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eStep 1\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eClick the learning button on the receiver module once. The LED indicator on the receiver module will flash and then stay on, indicating that the receiver has entered pairing mode.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 2\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePress any button on the remote control once. The LED indicator on the receiver module will flash and then turn off, indicating that the momentary mode has been successfully set.\u003c\/p\u003e\n\u003ch3 id=\"2-toggle-mode\"\u003e(2) Toggle mode\u003c\/h3\u003e\n\u003cp\u003eIn this mode:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePress the remote control button with key value 8 once, and the D0 pin on the receiver module will continuously output a high-level signal \"1\".\u003c\/li\u003e\n\u003cli\u003ePress the remote control button with key value 8 again, and the output signal on the D0 pin of the receiver module will change to \"0\".\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 id=\"how-to-set-toggle-mode\"\u003eHow to set toggle mode\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eStep 1\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eClick the learning button on the receiver module twice. The LED indicator on the receiver module will flash and then stay on, indicating that the receiver has entered pairing mode.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 2\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePress any button on the remote control once. The LED indicator on the receiver module will flash continuously and then turn off, indicating that the toggle mode has been successfully set.\u003c\/p\u003e\n\u003ch3 id=\"3-latching-mode\"\u003e(3) Latching mode\u003c\/h3\u003e\n\u003cp\u003eIn this mode:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePress the remote control button with key value 8, and pin D0 of the receiver module will continuously output a high-level signal \"1\".\u003c\/li\u003e\n\u003cli\u003ePress the remote control button with key value 4, and the output signal of pin D0 of the receiver module will change to \"0\", then pin D1 of the receiver module will continuously output a high-level signal \"1\".\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 id=\"how-to-set-latching-mode\"\u003eHow to set latching mode\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eStep 1\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eClick the learning button on the receiver module three times. The LED indicator on the receiver module will flash and then stay on, indicating that the receiver has entered pairing mode.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 2\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePress any button on the remote control once. The LED indicator on the receiver module will flash and then remain on, indicating that the latched mode has been successfully set.\u003c\/p\u003e\n\u003ch3 id=\"4-reset-function\"\u003e(4) Reset function\u003c\/h3\u003e\n\u003cp\u003eWhen the RX480E-4C receiver module is reset, all paired transmitters will be unpaired and will no longer be able to control the receiver module.\u003c\/p\u003e\n\u003ch3 id=\"how-to-reset\"\u003eHow to reset\u003c\/h3\u003e\n\u003cp\u003eClick the learning button on the receiver module 8 times. The indicator light will flash and then will turn off. The reset will be complete.\u003c\/p\u003e","brand":"rx480e","offers":[{"title":"Default Title","offer_id":51701013807399,"sku":null,"price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0996\/3657\/6551\/files\/QIACHIP_RX480E-4C_Size_Figure.webp?v=1784875259","url":"https:\/\/rx480e.com\/products\/rx480e-4c","provider":"rx480e","version":"1.0","type":"link"}